Used: TS-Optics ToupTek MONO Astro Camera 2600MP Sony IMX571 Sensor D=28.3 mm
Cooled USB 3.0 APS-C mono astro camera with powerful Sony CMOS sensor for astrophotography - Gen. 1 without adapter flane
TS2600MP Gen 1 - The camera is complete and functional, but the AR protective filter has two minimal scratches on the inside. These can of course be compensated for with a flat. Alternatively, you can remove the filter, but then the sensor is without protective glass. This would not be a problem with a fixed adaptation, for example. Another possibility is to connect an AR glass or IR filter to the T2 thread. Apart from the two scratches on the AR glass, the camera is as good as new. Powerful two-stage Peltier cooling up to 35 °C below ambient temperature Sony IMX571 APS-C format mono sensor - back-illuminated High resolution due to 3.76 µm pixel 16 bit ADC - dynamic range like a CCD sensor No more amplifier glow due to Zero-Ampglow circuitry Connection on telescope side: M42x0.75 female thread Heating of the optical window against dew condensation - adjustable in four levels. Working distance only 17.5 mm from T2 (M42x0.75) female thread Built-in AR filter as protection glass DDR3 Buffer 512 MB for more stable data transmission Binning is supported
EUR 1.599,00RRP EUR 2.480,00you save 35.5% (EUR 881,00)
incl. 19 % VAT (DE)
The VAT indicated refers to that applicable in Germany. After logging in, the VAT amount is adjusted to the applicable VAT of the stored delivery country. Therefore, the final price may vary accordingly.
excl. 6.95 € shipping costs (DE)
Please log in to calculate shipping costs to your country.
Roll over image to zoom in or klick it. The appropriate zoom factor ist adjustable with the mouse wheel.
Used: TS-Optics ToupTek MONO Astro Camera 2600MP Sony IMX571 Sensor D=28.3 mm
Cooled USB 3.0 APS-C mono astro camera with powerful Sony CMOS sensor for astrophotography - Gen. 1 without adapter flane
TS2600MP Gen 1 - The camera is complete and functional, but the AR protective filter has two minimal scratches on the inside. These can of course be compensated for with a flat. Alternatively, you can remove the filter, but then the sensor is without protective glass. This would not be a problem with a fixed adaptation, for example. Another possibility is to connect an AR glass or IR filter to the T2 thread. Apart from the two scratches on the AR glass, the camera is as good as new. Powerful two-stage Peltier cooling up to 35 °C below ambient temperature Sony IMX571 APS-C format mono sensor - back-illuminated High resolution due to 3.76 µm pixel 16 bit ADC - dynamic range like a CCD sensor No more amplifier glow due to Zero-Ampglow circuitry Connection on telescope side: M42x0.75 female thread Heating of the optical window against dew condensation - adjustable in four levels. Working distance only 17.5 mm from T2 (M42x0.75) female thread Built-in AR filter as protection glass DDR3 Buffer 512 MB for more stable data transmission Binning is supported
Details..
Technical data..
In the box..
Reviews..
Manufacturer infos..
Safety informations..
TS 2600MP Mono Astro Camera of the latest Generation
The camera with the powerful Sony IMX571 sensor allows astrophotography on a very high level. This cooled CMOS sensor has no amplifier glow anymore and can be used for all areas of astrophotography. Due to the high resolution of the sensor, already fine details are displayed even at shorter focal lengths.
Another advantage is the sensational light sensitivity. The QE of 91% by the BACK ILLUMINATION technology already allow deep astro images with short exposure times. This makes the camera very well suited for deep sky photography.
Gen. 2 supplied with removable T2 adapter
To make the camera even more flexible, the T2 connection on the camera is removable. The working distance of 17.5 mm remains unchanged. The optically effective path of the adapter is 8.7 mm - the flange focal distance of the camera without the T2 adapter is therefore 8.8 mm. Attachment of the adapter to the camera with 4x M2.5 screws - distance of the internal threads from the center is 26.5 mm Diameter of the adapter is 59 mm The adapter can also be used as a tilting adapter with optional M2.5 grub screws.
Back-illumination technology:
Sony´s back-illuminated CMOS imaging sensor improves sensitivity and noise reduction - key factors in improving image quality - by changing the basic pixel structure from front- to back-illuminated. The advantages of CMOS image sensors, such as low power consumption and high operating speed, have been retained.
The back illumination improves the light acquisition and increases the amount of light at the same time. This makes significantly shorter exposure times possible and leads to an improved quantum efficiency of 91 %.
Sony has developed a unique photodiode structure and on-chip lens optimized for backside-exposed structures, this results in higher sensitivity and lower random noise without light by reducing noise, dark current and defective pixels compared to the conventional front-side-exposed structure.
No amp glow:
Conventional CMOS sensors produce a faint infrared light source during operation, which can often be seen as a telltale sign of "amp glow" in the corners of uncalibrated images. Because this camera´s sensor uses zero amp glow circuitry, you don´t have to worry about "amp glow" even when using high-gain, long-exposure images.
Optimal support before and after purchase through Teleskop-Service
Through many years of experience, we can offer you optimal advice and also a very good after-sales service. We can perform almost all services at our premises. For a professional service we have among other things also a clean cabinet, where we can carry out repairs, cleaning etc. under dust exclusion.
Connection to correctors with M48 thread and 55 mm working distance with filter change
Most coma correctors or field flatteners for refractors have 55 mm working distance and a M48x0.75 thread on the camera side. Here you will find an interesting suggestion for the connection. The camera has a back focus of 17.5 mm from the T2 female thread. The adapters are from the camera to the corrector:
1. TSFSLM48T2 - filter drawer with T2 connection on the camera side and M48 thread on the telescope side. 2. TSVF220 - 20 mm M48 extension. Total 55.5 mm flange focal distance - the 0.5 mm compensates well for the glass path of the filter - spot landing!!!
The manufacturer of the camera is ToupTek
As one of the largest manufacturers of professional cameras for digital photography, ToupTek brings the necessary knowledge for cameras that just work. Teleskop Service receives the cameras directly from the manufacturer, we are in direct contact with ToupTek to provide you with first class service.
Product video
Teleskop-Service has made an overview video for ToupTek´s cameras:
Quick Guide
For installation you only need a quick start guide, it can be found here.
Informative PDF files about the TS-Optics/ToupTek cameras
We have made two helpful PDFs about some cameras from TS-Optics.
The first one gives general information about many cameras, it is in German language and can be downloaded here. The second PDF lists information about some camera sensors, you can download it here.
Driver and Software
TS provides drivers and software for this camera, you can download them from the following links:
Mit dieser Kamera erzielte astrofotografische Ergebnisse auf Astrobin
Hier finden Sie einige Astrofotografien, die mit diesem Kameramodell gemacht wurden: Link zu Astrobin
Sensor:
CMOS Mono Sensor IMX571
Size:
23.5 x 15.7 mm - diagonal 28.3 mm
Pixel size:
3.8 µm
Number of pixels:
6224 x 4168 - 26 MP
Bit depth:
16
Frames per second:
7 frames at full resolution
Cooling:
Peltier cooling up to 35 °C below ambient temperature
Power supply:
12 V 3 A
Power connection:
5.5/2.1 mm coaxial power connector (2.5 mm DC connector)
Interfaces:
USB 3.0 and USB 2.0
Supported operating systems:
Windows from XP
Dimension:
Diameter 80 mm - Lenght 100 mm
Connection telescope side:
T2 internal thread (M42x0,75)
Back focus:
17.5 mm (distance sensor to internal thread)
Camera Dust cap (on camera) T2 extension with 16.5 mm length T2 extension with 21 mm length Telescope adapter Power supply unit with power cord USB 3.0 high-speed cable - length 1.5 meters USB stick with software Note with QR code and web link Transport case
Mit dieser Kamera erzielte astrofotografische Ergebnisse auf Astrobin
Hier finden Sie einige Astrofotografien, die mit diesem Kameramodell gemacht wurden: Link zu Astrobin
We use cookies to personalize content and ads to offer features for social media and analyze the hits on our website. We also provide information about your use of our website to our partner for social media, advertising and analysis continues. Furthermore, purely technical cookies are used to ensure the functionality of the website, these cannot be deactivated. AcceptDenyDetailed Information