TS-Optics M48 Filter Changer - strengthened Design

TS-Optics Filter Changer with M48x0.75 Connection for Astrophotography and Observing

Change filters within only a few seconds without having to remove or turn the camera. With only 100 grams weight and a diameter of 80 millimetres, this filter quick changer is more compact and lightweight than any filter wheel. The filter changer is an exiting alternative, any filter combination is possible, even the combination of 1.25" and 2" filters. As a result, the TSFSLM48 filter changer becomes to one of the most versatile accessories on the market.

The advantages of the TSFSLM48 filter changer at a glance:

♦ Due to a strengthened housing and longer M48 threads (male and female), the changer is suitable even for heavy cameras.
♦ With only 100 grams and 85 mm diameter, the focuser is almost not burdened, thus filter changing becomes possible even for smaller telescopes.
♦ You can use any filters and filter combinations and even change between mounted 1.25" and 2" filters, suitable drawers can be found in the accessory section.
♦ Due to only 18 mm length, the changer can easily be combined with most cameras and correctors.

Application areas of the TS-Optics filter changer:

♦ Deep-sky astrophotography:L-RGB images, false color images, contrast enhancement with nebula filters and monochrome or color astro cameras and DSLR
♦ Planetary observing and planetary images: quick changing of color filters for enhancing the contrast effect. In photography, the images can be combined well.
♦ Deep-sky observing: The impressions without filter, with UHC filter, O-III filter and other filters can be compared directly. Thus you can always get the maximum of detail out of the object!

Which filter drawer is suitable?

We offer drawers for 1.25" filters and for 2" filters:

♦ TSSCHUB1 ... drawer for 1.25" filters. The cell can be up to 7 mm heigh (the male thread of the cell is not taken into account).
♦ TSSchub2 ... drawer for low-profile 2" filters. The cell can be up to 6.5 mm heigh (the male thread of the cell is not taken into account).

Via "Customize your Product" you can orde any number of drawers at the same time.

Practical advices from Teleskop-Service:

♦ Especially with adaptions for astrophotography, it depends on a fraction of a millimetre. With our M48 tuning rings and extension tubes, you can adapt the filter changer exactly to your "image train".
♦ We recommend one drawer for each filter. Interchanging of filters during by screwing while photographing or observing is rather unfunctional.
♦ Optimal storage is provided by the protective case FIPA92. With this, the filters are always readily available and are carefully stored.

♦ TS Filter Changer
♦ Filter Drawer is optional