ATIK Colour CCD Camera 414EX
Compact Housing - Sony ICX825 Sensor with Anti Blooming - 11 mm Sensor Diagonal - 1392 x 1040 Pixel - Pixel Size 6.45 µm x 6.45 µm
The ATIK414EX uses the SONX ICX825 sensor. The sensor features the same EXview HAD CCD II used in the 428EX, 460EX and 490EX cameras. The camera is suitable for astrophotographers who like to have a lot of information with short exposure times.
One of the great advantages of the Atik 414EX is the housing with a diameter of only 60 mm. This makes the camera particularly suitable for FastStar or Hyperstar telescopes.
Astrophotographic results obtained with this camera on Astrobin
Here you can find some astrophotographs made with this camera model:
Link to AstrobinGood storage is an important preventive measure against dew and also extends the service life
After use, put the camera straight into the TS Protect Case and add some silica gel. During storage, the silica gel absorbs the moisture from the camera. At the same time, the penetration of moist room air is prevented. Dry storage can even partially regenerate the small desiccant tablets in cooled cameras. Your camera or accessories are always ready for you in optimum condition. You can find the silica gel and the case in our product recommendations.
The cameras are not airtight, so if the camera remains on the telescope, it is exposed to moisture. The small amount of desiccant in the camera can protect the sensor and the inside of the protective glass from moisture for the duration of the exposure, but not for days on end. Moisture problems can be the result. A simple trick is to stretch a plastic bag around the focuser to which the camera is attached so that no air can get in. Silica gel is placed in a small cloth bag inside the plastic bag. This will also create a "dry climate zone" for the camera on the telescope. This allows you to leave the camera on the telescope for a few days for an imaging session lasting several days.
In the medium and long term, however, this is no substitute for proper storage in an airtight case with silica gel.