Artesky WandererBox Plus V3

Artesky WandererBox Plus V3 for optimal power management on the telescope

The WandererBox Plus V3 is equipped with 6 12 V DC outputs, 3 USB 2.0 ports and 2 USB 3.1 Gen 1 ports; thanks to this system, you can avoid numerous cables on your telescope and have a much tidier system.

An integrated step-down module allows it to provide (in total) up to 5 A of continuous current without latency over the USB connections.

All USB ports can be turned on or off together and are also protected against moisture and electrostatic charge.

12 V Outputs:

Port 1 is an always-on output for up to 10 A, perfect for equipment that needs to be always on while the PC is in use.

Port 2 is a switchable output for up to 3 A, with the voltage adjustable from 0 to 13.2 V - helpful for supplying power to cameras.

Port 3 is a switchable PWM output for up to 8 A that allows manual or automatic control of dew heaters.

Ports 4, 5 and 6 are parallel - and therefore only simultaneously switchable - outputs for up to 8 A (combined).

Monitoring:
The WandererBox Plus V3 monitors air temperatur and humidity for calculating the dew point and adjusting the temperature of the telescope objective via changing the power of a dew heater. The objective´s temperature is also monitored via a temperature probe and can also be set to a fixed value instead of following the dew point.

Input current and voltage monitoring help sensing the margin between current power consumtion and maximum power consumption as well as the remaining capacity of a battery.

Weighing only 150 g, the Wanderer Box Plus V3 is the ideal partner for all applications, small and large setups.

- WandererBox Plus V3
- USB3.0 data cable, 0.5 m
- Adapter cable 5.5/2.1 mm to RCA, 0.1 m
- Temperature probe, 1 m
- Temperature and humidity sensor, 1 m
- Adapter 5.5/2.1 mm female to 5.5/2.5 mm male

Safety informations: PDF Download