With this adjustment laser, exact collimation of your Newtonian telescope can be done in just a few minutes, even at daytime.♦ Suitable for all Newtonian telescopes
♦ Solid metal construction
♦ 1.25" barrel size (no 2" barrel or adapter supplied)
♦ Brightness adjustable in 7 steps
♦ Comfortable 45° insight, you can see the adjustment from the main mirror
♦ The laser is adjustable
♦ Collimation manual with example images included
TS Optics 1.25" Laser Collimator for Newtonian telescopes
This helpful adjustment aid is a must for any Newtonian telescope. The LA2 offers a quick and easy way for checking the collimation of your Newtonian and, if necessary, also correct it.
The laser collimator is delivered already well collimated. The adjustment screws at the upper side are protected by soft rubber. Normal operation or changing the batterie will not misalign the collimator. If the laser should fall on the floor, you can remove the rubber plugs and realign the laser.
A short manual - how to use the LA2 laser collimator:
1. Preparation: Turn the tube into a horizontal position and rotate it so that the focuser points upwards. Then you insert the laser into the 1.25" receptacle. The collimator should not be clamped in order to prevent tilting. A tilted laser would degrade the collimation result.
2. Collimation of secondary mirror: Switch on the laser diode, look into the tube to the primary mirror and use the collimation screws of the secondary mirror until the laser dot is centered on the primary mirror. A center marking (hole reinforcement ring) is recommended for this.
3. Primary mirror collimation: Turn the laser collimator so that you can see inside the 45° angled view port from the rear end of the telescope. If the optics is coarsely pre-adjusted, you can already see the reflected spot on the plate. Then use the primary mirror collimation screws until the returning laser dot hits the center bore of the laser. (Image at left - here, the primary mirror has the be adjusted a bit more.)
Finished! Now your Newtonian is properly collimated and ready for a successful and joyful night of observing!.| Material: | Metal housing |
| Barrel size: | 1.25" |
| Insight: | 45° Screen for comfortable insight from the side |
| Brightness: | Adjustable in 7 steps + "0" for off |
| Battery: | Battery (CR2032) is built-in |
♦ TS Laser Collimator with battery
♦ User manual
♦ No 2" barrel, no 2" adapter
The newest reviews:
(7 reviews)* * * * *
2020-06-12 23:20:59, Noelle Fava
"Easy to use"
* * * * *
2020-05-20 23:24:17, Adriano Anfuso
"Nice and handy laser collimator, it makes the collimation process much easier. Recommended."
* * * *
2020-05-10 23:03:10, Alessandro Santato
"The laser was collimated as they say. I used it on a Starblast 6 and the laser shape on the main mirror was a bit irregular (more rectangular than a clear round point). However, it did the job."
* * * * *
2019-09-27 13:33:31, Chris Roozekrans
"good quality, low price"
* * * * *
2018-02-03 12:41:11, Olav Norrud
"So much easier to collimate alone with the 45° target plate."
* * * * *
2017-04-05 14:37:05, Christophe GROSSET
Super
* * * * *
2016-11-29 22:06:53, Vittorio Liberti
"Ottimo prodotto"
