Manufacturer: Astrolumina QHY
Product number: 2023-1810-1

EUR 1.299,00


incl. 19 % VAT (DE)  
The VAT indicated refers to that applicable in Germany. After logging in, the VAT amount is adjusted to the applicable VAT of the stored delivery country. Therefore, the final price may vary accordingly.
excl. 6.95 € shipping costs (DE)  
Please log in to calculate shipping costs to your country.
more details to the shipping costs ...

  • On stock
  • Only 1 pcs left in stock





There are no reviews for this product
  • Details..
  • Technical data..
  • In the box..
  • Reviews..
  • Manufacturer infos..
  • Safety informations..
The Astrolumina ALccd9c uses the color sensor Kodak KAF-8300 with almost 9 MP. The pixel size of 5.4 µm in square allows optimal sampling even in high resolution systems. The diagonal size is large enough for most uses.

Advantages:
high sensitivity
little noise
little dark current
fast data transmission
large chip area
compact case
powerful software
hard- and software support

Cooling:

A temperature of up to 50 °C below ambient can be set via camera control software.

Good storage is an important preventive measure against dew and also extends the service life:

After use, put the camera straight into the TS Protect Case and add some silica gel. During storage, the silica gel absorbs the moisture from the camera. At the same time, the penetration of moist room air is prevented. Dry storage can even partially regenerate the small desiccant tablets in cooled cameras. Your camera or accessories are always ready for you in optimum condition. You can find the silica gel and the case in our product recommendations.

The cameras are not airtight, so if the camera remains on the telescope, it is exposed to moisture. The small amount of desiccant in the camera can protect the sensor and the inside of the protective glass from moisture for the duration of the exposure, but not for days on end. Moisture problems can be the result. A simple trick is to stretch a plastic bag around the focuser to which the camera is attached so that no air can get in. Silica gel is placed in a small cloth bag inside the plastic bag. This will also create a "dry climate zone" for the camera on the telescope. This allows you to leave the camera on the telescope for a few days for an imaging session lasting several days.

In the medium and long term, however, this is no substitute for proper storage in an airtight case with silica gel.

Control Software:

CCDCap is easy to use and supports all features of the camera. Drivers are also included.

Important note: There is no power supply included in the scope of delivery. You absolutely need the AL70013 which is shown in the accessories section!
Total pixel:3448*2574 (8.9 mega pixel)
Effective pixel:3358*2536 (8.6 mega pixel)
Active pixels:3326*2504(8.3 mega pixel)
Pixel Size:5.4 um * 5.4 um
FullWell:25.5 Ke-
Imager Size:17.96 mm (H) x 13.52 mm (V) 4/3inch
Readout noise:8e- to 10e-(Typic @1Mpixel/s)
Preview Speed:3 Mpixel/s (3 sec download time)
Download Speed:1 Mpixel/s (9 sec download time)
Peak QE:33%@blue 41%@green 33%@red
Chip surface:with microlensing
ABG:1000X
Conversion:16 bit ADC with CDS and Preamp
Control interface:USB2.0 High Speed
Buffer:Build in 32 MBytes SDRAM buffer
Binning Modes:No Bin(1*1), 2*2,3*3,4*4
Additional Port:communication port to QHY color wheel
Cooling:improved 2-Stage TEC cooling max -50 °C below ambient
Heat sink:improved Heat Sink For KODAK CCD
Temperature measurement:build in Temp sensor and 16bit high presion ADC
Control Electronics:DC201 DC adapter & TEC Controller, Regulated
Built-in Shutter:Mechanical shutter for Full Frame CCD
Dew Protection:Built-in Heater to avoid dew on CCD optic windows in very high humity
Case:fully airproof with two 4.0 mm air sockets
Weight:510 g
Distance from the T2 thread to the sensor:15 mm without glass and 27 mm with glass
Camera head
T2 connection adaptor

FAQ incl. installation manual: http://www.astrolumina.de/kamerasysteme/alccd-qhy/faqs/index.php Download Software: http://www.astrolumina.de/kamerasysteme/alccd-qhy/software/index.html
Manufacturer / Importeur:Astrolumina Michael Breite
Street:Alfred-Wirth-Straße 12
ZIP / City:41812 Erkelenz
Country:Deutschland
Telefon number:+49 2431 9730725
Email:info@astrolumina.de
Website:www.astrolumina.de
Safety informations: PDF Download


Recommended accessories

Reviews