Manufacturer: ASI - ZWO
Product number: ZWO-ADS

EUR 32,95


incl. 19 % VAT (DE)  
The VAT indicated refers to that applicable in Germany. After logging in, the VAT amount is adjusted to the applicable VAT of the stored delivery country. Therefore, the final price may vary accordingly.
excl. 6.95 € shipping costs (DE)  
Please log in to calculate shipping costs to your country.
more details to the shipping costs ...

  • On stock





rating: 5.0 of 5
  • Details..
  • Technical data..
  • In the box..
ZWO Anti-dew heater strip for cooled ASI Cameras
The anti-dew heater strip is used for anti-dew on the front window of the ASI cooled cameras. This  kit includes the zip-tie, anti-dew heater strip, and a Y power cord.

The thickness of the anti-dew heater strip is 0.2~0.3 mm. The “Y” power cord is designed to connect in-line with the cooler power supply for convenience.

The thickness of the spacers is 0.3 mm and 0.5 mm. They are used for aligning the camera and EFW.

We recommend a 12 V DC adapter with at least 0.35 A, as the heating power on the strip is ~4.2 watts. You can use the same power cord to power both fan and heater simultanously, but make sure not to exceed the recommended amount of amperes.

How to use it:
Tear out the protective film on adhesive tape.




Put the anti-dew heater strip on the front facing of the camera and make sure the black cable is in the right position (lining next to the DC plug at the rear end).




Tie the black cable with a zip-tie on the camera body.




Plug in the power cord, then everything is done.





Recommend:12 V at 0.35 A
Heating Power:ca. 4.2 Watts
Thickness of spacers:0.3 mm and 0.5 mm
Outer diameter of the heater:approx. 7.5 cm
Inner diameter of the heater:approx. 5 cm
Anti-dew heater strip
Zip-Tie
Y power cord



Reviews

Written by Axel Schlinghoff
on 2024-01-10

"Erledigt ihren Job und hält die Kamera frei von Beschlagen. Ist etwas empfindlich an den Kontakten."

Written by Christian Backs
on 2022-12-23

"Alles super 👍"

Written by Jakub Lach
on 2021-07-10

"Besser haben und nicht brauchen als brauchen und nicht haben ;)"

Written by Hubert Hautecler
on 2020-10-27

"Works fine, no damp anymore on the chip."

Written by Wilfried Wacker
on 2020-08-04

"Ich verwende dieses Produkt sogar für eine eigentlich nicht dafür vorgesehene ASI 178mm. Funktioniert ebenso tadellos..."

Written by Raik Erdmann
on 2020-02-08

"Passt gut zu den gekühlten ASIs, verdeckt leider die Schrauben zum Öffnen der CMOS-Kammer. Problem ist aber lösbar. Die Funktion ist bisher super, Kamera bei -10C und Außentemperatur bei -4C, kein Beschlagen, kein Eis. Viel kälter wird es wohl bei uns nicht mehr...;-)"

Written by Andrei Gusan
on 2020-01-30

"It´s a must!"

Written by Micha Frommhold
on 2020-01-19

"Funktioniert wie gewünscht. Nichts zu bemängeln."

Written by Thilo Schramm
on 2019-11-26

"Die Heizfolie lässt sich gut aufkleben und bei Bedarf auch nochmals lösen. Die Befestigung des Kabels mit den Kabelbindern ist als pragmatisch zu bezeichnen. Es liegen Distanzscheiben bei die verhindern, dass die Heizfolie beim Zusammenbau am Filterrad eingequetscht wird. Einen Praxistest konnte ich mangels Minusgraden noch nicht durchführen, denke aber, dass die Heizfolie ihren Zweck erfüllen wird."

Written by Hans Rehann
on 2019-09-29

"Läuft wie Beschrieben."

Written by Dominik Künzler
on 2017-08-05

"Top Qualität. Schneller Versand. Jederzeit wieder."

Written by Bernard DELATTRE
on 2017-06-29

"facile a installer"