Manufacturer: Geoptik
Product number: 30B304

EUR 214,95


incl. 19 % VAT (DE)  
The VAT indicated refers to that applicable in Germany. After logging in, the VAT amount is adjusted to the applicable VAT of the stored delivery country. Therefore, the final price may vary accordingly.
excl. 6.95 € shipping costs (DE)  
Please log in to calculate shipping costs to your country.
more details to the shipping costs ...

  • Item has delivery time
  • Please notify by email when available again.

  • I agree to my email address being saved.  




Product expected to be available from 05.04.2024

Pre Order:



rating: 5.0 of 5
  • Details..
  • Technical data..
  • In the box..
  • Reviews..
The Geoptik flat field adapter solves the problem of unevenly illuminated deep-sky images. This effect is often caused by vignetting (inherent to all optical systems, more or less) or prisms of off-axis-guiders inside the optical path.

Problem solution is capturing an evenly lit background. With this "flat field", image processing software is able to remove the vignetting effect from the main picture. Here, we recommend taking several flat fields and combining them to one "master flat". Nearly all astromical image processing softwares (Astro Art, MaxIm DL ...) can handle this.

Advantage of the Geoptik Flatfield Adapter:

At the sky, an evenly lit background is nearly never present. Even if clouds, late dusk or fog appear as absolut evenly illuminated, in fact they aren´t. These errors will then be calculated into the latter picture. The Geoptik flat field adapter provides a true flat field - a first class reference. We recommend taking such flat fields in darkness to prevent stray light from entering the optical system.

Using the Flatfield Adapter:

This is very simple: Direct the telescope or lens roughly to the zenith and put the flatfield adaptor on the top of it. Switch the adaptor on. Now you have an even lighting on the chip, only changed by irregularities in the telescope or on the chip. Make flatfield exposures, we recommend 4. Make them in the darkness to avoid stray light adulterating the results. Now you have a base which can be combined to a "master flat".





The image above shows a typical flat field with obvious and slightly uneven vignetting. This is normal with most telescopes.

Technical details:
Suitable for lenses / telescoeps up to 210 mm outer OTA diameter
27 mm thick. Locking with three nylon thumbscrews
Powered by an external 12 V DC power source
Weight: 680 Gramms

Maximum outer OTA diameter:210 mm
Thickness:27 mm
Light colour:neutral white
Brightness:dimmable
Voltage:12 V
Current:0.24 A
Power connector:coaxial power connector 5.5 x 2.5 mm (tip positive) with adaptor from cigar lighter receptacle
Weight:680 g
1 Flat Field Adapter
1 Power adapter
3 Plastic screws
Cigarette lighter cable

How do I get a good flat field image?
A good flat compensates for edge shading (vignetting), but also for darkening caused by dust on the filter, sensor or corrector. The background becomes even, the contrast can be raised further to make finer details visible in faint nebulae. The following basic settings should be noted:
The ISO or gain setting must be the same as for the lights, i.e. the actual astrophotography.
Telescope, camera and accessories, such as filters, off-axis guider etc., must be the same as for the actual exposure, also the position of the focuser should be unchanged.
The exposure time should be so short that nothing is "burned out", i.e. overexposed. Only in this way can the flat unfold its full effect. We recommend an exposure of 30-50%. The flat should not be burned out, but it should also not have any unexposed areas.


How do I find the right exposure time with the shooting software, for example Maxim DL?

The ADU value (Analog Digital Units) helps here. Every capture program shows this value when you move the mouse over the image. In the center of the image, where the illumination is highest, the ADU value is highest. The longer you expose, the higher this value becomes. If the ADU value is higher than the maximum value of the camera, the image is overexposed. A camera with 16 bits has a max. ADU value of 65536, one with 14 bits has 16384, one with 12 bits only 4096.

The exposure time of the flat should be so short that in the middle of the flat the ADU value is at most 50% of the maximum value of the camera. Then the flat looks well exposed. We recommend to take at least 10 flats per exposure and to process them to a "master flat".

If the flatfield box is too bright, that means it always produces overexposed images, then a white paper, which is fixed in the flatfield box, helps. This will dim the light and allow for slightly longer exposure times.


Recommended accessories

Reviews

Written by Ernst Arnold
on 2022-09-08

"Funktioniert einwandfrei, Helligkeit kann geregelt werden und passt gut auf meinen APO mit ca. 170 cm Durchmesser und auch den TAK m180c mit ca. 210cm Durchmesser."

Written by Jose Munha
on 2018-06-05

"very good"

Written by Peter Warmuth
on 2016-06-10

"Das Teil ist nicht ganz billig, aber die Ergebnisse sind ausgezeichnet. Durch die gleichmäßige Ausleuchtung erzielt man in kürzester Zeit einwandfreie Flats. Ein Punkt Abzug für den Preis :-)"