Geoptik Telescope Protective Cover - 160 x 120 cm

Protective cover by Geoptik

Protects your telescope from the elements

The advantages of protective covers from Geoptik:
♦ is made of tear-resistant material
♦ reflects sunlight and prevents the telescope from heating up
device
♦ consists of 3 layers, is insulating and water-repellent

Geoptik´s protective covers consist of three layers. The top layer reflects a large part of the sun´s rays. Underneath there are two welded plastic layers. This construction makes the protective covers particularly tear-resistant and durable.

Suitable for the following telescopes, among others:
♦ SCs up to approx. 40 cm aperture
♦ Dobsons or Newtons up to approx. 40 cm aperture
♦ refractors up to approx. 18 cm aperture

Practical tip from Teleskop-Service:

You should not use a waterproof telescope cover as permanent solution for covering your telescope out of a house or an observatory. As a precaution against condensate marks, you can cover the telescope with a cotton cloth (old bed sheet) before pulling over the waterproof cover.

Protective Cover

Question:
Do the protective covers also provide protection in the rain??

Answer from Teleskop-Service:
The protective covers are water-repellent, but moisture can penetrate during heavy rain. The main purpose of the covers is to protect against dust, light moisture and sunlight. If you want to leave the telescope set up for a longer time, for example at a telescope meeting, we recommend three layers:

1. An old linen bed sheet on the telescope, this absorbs the stagnant moisture of the night and prevents condensation.
2. The protective cover, which provides protection from most environmental influences.
3. If the weather is unstable (risk of rain), you should put an additional plastic cover over it to prevent water from entering.

Always fasten the whole thing well, so that everything remains firm in the wind.