ATIK11000C


in stock
in stock

ATIK 11000 color CCD camera - sensor 45mm - 11MP - 9µm



instead 4.597,48 EUR
only 4.429,41 EUR
excl. VAT
excl. 4,11 € Shipping costs


Description:

Atik 11000 - a very high resolution, large format cooled CCD camera for astronomy.
This is the top-of-the-range camera available from Atik and is the result of extensive design and development.

ATIK 11000 S/W CCD Kamera - 45mm Diagonale
It incorporates a huge 35mmx35mm sensor. This is the camera for the uncompromising user looking to create stunning high-resolution images.

The Atik 11000 uses the Kodak KAI 11002 CCD and comes in one-shot colour version. It is difficult to get an impression of just how big the sensor is without seeing it first hand, but the graphic below is intended to give some idea.
The resulting images can be amazingly detailed, and can be printed out at A3 size or beyond or simply enjoyed on a computer monitor.


ATIK 11000 S/W CCD Kamera - 45mm Diagonale - Chip
Comparison of sensors used in The Atik 11000, Atik 4000 and Atik 314L

Common features of the Atik 4000 and Atik 11000

While the other cameras in the Atik range use Sony sensors, the large-format cameras incorporate Kodak devices. These have gained a great reputation in astrophotography and offer qualities not available in the Sony CCDs. However, optimum performance from the Kodak chips is only obtained with the use of highly sophisticated control electronics and advanced cooling systems, and this is where Atik's expertise in design and build comes to the fore.

The Kodak sensors require dark frames to be used for calibration, and these must be taken at the same temperature as the primary image.
The Atik 4000 achieves this through the provision of full, set-point, temperature regulation using a two-stage Peltier element and fan. This can provide cooling to 38 degrees below ambient and will be suitable for the majority of conditions.

For more demanding use, water can be pumped though the camera's internal heat exchanger. When water cooling is employed, the maximum amount of cooling depends on the water temperature, with approximately 45 degrees of cooling being available using water from a typical cold tap.

Such efficient cooling cuts thermal noise to an absolute minimum and reduces the prevalence of hot pixels, but it raises the risk of condensation forming in or on the camera. A high-efficiency desiccant is used to dry the air inside the sensor chamber, preventing internal condensation, while condensation on the outside of the camera is avoided with the use of heater elements which gently warm the window. The power supplied to this heater is controllable through software so that it can be adapted to the environmental conditions.

The Atik large-format cameras have been designed and built to fulfil the needs of the most demanding users, whilst offering an unparalleled simplicity of use. The cameras have only two sockets - a 2.1mm socket for the 12V power supply and a USB2 port for communicating with the computer - and they are compatible with our highly acclaimed Capture software as well as AstroArt, CCDSoft and MaximDL.

ATIK 11000 S/W CCD Kamera - 45mm Diagonale
Rear terminal with USB- and 12V= connection

CCD Grades.

As standard the Akik 11000 is fitted with a KAI 11002 class II sensor, which allows for a small number of column defects. Alternatively a class I sensor with no column defects can be specified. Does the CCD grade matter? We feel the price premium placed on the class I sensor is not justified when the camera is to be used for astro-imaging. Briefly, this is because Kodak's grading scheme uses a test where the CCD is not cooled, exposures are fractions of a second and the sensor is read out several times a second. In astro-imaging, conditions for the sensors are very different since the sensor is cooled, exposures are typically many tens of seconds, and readout takes several seconds. Also it is expected that the images will be corrected with a dark frame. The result is that the grading tests do not reflect performance in astro-imaging in a useful way.

Note:
We only use the latest generation of KAI 11002 sensors, which have anti-reflection coatings on both sides of the glass cover. This reduces reflection artifacts generated between the CCD surface and the cover.

What's included in the box?
- Camera body
- 3 meter USB cable
- 1.8 meter battery power connector (Car lighter plug)
- CD-ROM with drivers, software and User's manual (PDF)
- Quickstart guide (paper)
- A high quality case with die cut foam inserts
- A universal (110-230V) power supply
- Our highly regarded software, Capture, is provided as well as plug ins for MaximDL, CCDSoft and AstroArt.
- System requirements: Pentium II class PC, with 64MB RAM, Windows XP or later (Vista 32 included), CD-ROM drive and USB 2.0 port.


up ...
We recommend following products:

Eyepieces:
113,45 EUR*


Baader UHC-S / L-Booster-Filter 2" mounted

 
  
Cleaning & Collimating:
10,00 EUR*


TS-Optics CleanPen - Optics Cleaning Pen with Pad and Brush

 
instead 6,68 EUR
only 5,80 EUR*


TS-Optics Optical Super Microfiber Cleaning Cloth

 

Baader Optical Wonder Cleaning Fluid with Dose Vaporizer

 
6,64 EUR*


TS-Optics Cleaning kit (five parts) - for almost all optical surfaces

 
  
Adaptors:
20,17 EUR*


Baader M48 female to M54 male Filterthread - 2" filterholder

 
24,37 EUR*


Adapter: 2" receptacle / SC - SC accessories to 2"

 
instead 83,19 EUR
only 74,79 EUR*


TS-Optics M54 Filter Drawer for Ø 50mm and 50.4mm unmounted filters

 
100,00 EUR*


Geoptik Adaptor for Canon EOS Lenses to T2 for CCD cameras - with 1/4" Phototripod

 
100,00 EUR*


Geoptik Adaptor for Nikon lenses to T2 for CCD cameras - w/ 1/4" thread

 
6,72 EUR*


TS-Optics 1.0mm Stainless Steel Fine Tuning Ring for M54

 
6,72 EUR*


TS-Optics 1.5mm Stainless Steel Fine Tuning Ring for M54

 
41,18 EUR*


Trutek Adapter 2" connection to M54x0.75 thread - short

 
 
Power Supply:
instead 49,58 EUR
only 41,18 EUR*


12V 12Ah rechargeable lead gel battery

 
65,55 EUR*


TS-Optics 7 Ah rechargeable power tank with integrated red/white light

 
 
Photo Acessories:
instead 83,19 EUR
only 74,79 EUR*


TS-Optics Filter Quick Changer for 2" filters - T2 mount - length 15 mm

 
24,37 EUR*


TS-Optics Optics Filter Drawer for 2" mounted filters - for TS-Optics Filter Quick Changer

 
 
up

E-Mail: info@teleskop-service.de • Phone: +49 (0)89-9922875-0
Parse Time: 0,361s
This shop uses cookies that are necessary for its correct function and, if necessary, also uses cookies from third party providers. By using our shop you agree to the use of cookies.

OKMore info ......
Please note that only latin characters, numbers and common special characters can be entered.