Manufacturer: Dew Not .. Tau
Product number: DNController2

EUR 129,90


incl. 19 % VAT (DE)  
The VAT indicated refers to that applicable in Germany. After logging in, the VAT amount is adjusted to the applicable VAT of the stored delivery country. Therefore, the final price may vary accordingly.
excl. 6.95 € shipping costs (DE)  
Please log in to calculate shipping costs to your country.
more details to the shipping costs ...

  • On stock





There are no reviews for this product
  • Details..
  • Technical data..
  • In the box..
Dew-Not Controller for up to four Dew Heaters
The DNController2 controller is a dual channel controller based on PWM (pulse width modulation) technology. Each channel controls two outputs for a total of four outputs. Each channel is capable of a duty cycle from 5% on time (effectively off) to 95% on time at the high setting. Best results are normally achieved with an initial setting between medium and high.

This controller is manufactured for operation on 12 volts DC and should never be operated with any other voltage. Total amperage capacity for all four outputs is 6 amps. The controller is supplied with a six foot cord equipped with a cigarette lighter plug end. A 6 amp fuse is incorporated into the plug to access the fuse, turn the knurled knob on the plug counter clockwise.

The Dew Not controller fits to both Dew Not and Kendrick heating systems, but other heaters with RCA plugs, 12 V voltage rating and suitable maximum current should work, too.

Technical specifications:
Microprocessor based dual channel controller
UL 94V0 enclosure
Zero to 100% output control per channel.
Two outputs per channel (may be increased using DNS splitter, sold separately)
6 amp capacity
6 foot power cord fused @ 6 amps
Virtually RFI free
Operating voltage is 12 volts.
Two stage low battery indicator:

If voltage drops to 11 volts the power led begins slow blinking as a low voltage warning.
If the battery voltage drops to 10.5 volts the power led starts fast blinking and the outputs turn off. When the voltage recovers to over 12 volts it will start operating again
The 10.5 volt threshold is to prevent permanent damage to battery packs.
Channels:2
Output control:0% to 100%
Control technology:PWM (pulse width modulation)
Connectors per channel:2
Connector type:RCA jack
Power cord:1.8 m cable with plug for cigarette lighter
Input voltage:12 Volt (13.8 V absolute maximum)
Output current:up to 6 A
Controller box with power cord
User guide



Recommended accessories

Reviews