|
Standard equipment:
-- USB cable and autoguiding cable - fitting to ST4 autoguider ports
-- Camera with T-2 connector and 1.25" filter thread
-- Additional adapter from T-2 to 1.25"
-- Camera driver, capture program and instruction manual on CD (manual in German)
-- Additional camera drivers for MaxIm DL, PHD, AstroArt and Guidemaster
Support from Germany, not from overseas!
Technical Details:
Sensor (Micron MT9M001 monochrom-CMOS-Chip):
Aktive Pixel: 1.280 x 1.024 (1,31MPixel)
Chip size: 6.7 x 5.3mm (Diagonal 8.5mm)
Pixel size: 5.2µm x 5.2µm (squared pixels)
Dynamic range: 68.2dB
Quantum efficiency: ca. 56% max at 560nm Read-out electronics:
Data depth: 8bit
Pics/second: max.10-15
Focus mode: max. 30 pics/sec
Interface: USB 2.0
Integration time range: 0.001 - 3 seconds (planetary mode) and 0.001 Sekunden - 1 minute (guiding-mode) active cooling:
not necessary telescope connector:
M42x0,75 female (T2). Sensor spacing to T-2: 13,9 mm
additional 1,25" filter thread inside T-2) Auto guider interface:
SBIG ST-4 ® compativle with 6-pin RJ-12 connector
Wiring scheme:
1. n/c
2. 0V
3. RA-
4. Dec-
5. Dec+
6. RA+ Dimensions:
62mm diameter und 30mm height Weight:
105g The camera does not net external power supply; it is directly powered via USB. Software:
ALccd 5- ALvideo for planetary photography. MaxIm DL- und AstroArt-Plugin with all standard functions.
Freeware in Internet: Stark-Labs PhD-Guiding and Guidemaster. The ALccd5 camera has most modern electronic; it therefore needs a PC with USB 2.0 connectivity. It is compatible to Windows XP SP2 and higher. The camera applies to the RoHS regulations.
Important Note for Mac OS Users:
The ALCCD5 camera is unfortunately not compatible with Mac OS. However you can emulate a Windows OS inside your Mac OS (provided your computer has an Intel processor) using "Bootcamp" (included with current Mac OS versions) or "Parallels" (available separately for your computer). In this emulated Windows surface the ALCCD will work without problems. | 
