ATIK11000M


in stock
in stock
ATIK 11000 mono CCD camera - sensor 45mm - 11MP - 9µm



4.531,93 EUR
excl. VAT
excl. 4,54 € Shipping costs


Description:
Atik 11000 - 11 Megapixel full size sensored camera
Kodak KAI11002 anti blooming sensor (37.25 x 25.7 mm), 9 µm pixel
Effective dT 38° cooling and heated front glass agains dew

ATIK 11000 S/W CCD Kamera - 45mm Diagonale

The Atik 11000 uses the Kodak KAI 11002 CCD and comes in mono version. It is difficult to get an impression of just how big the sensor is without seeing it first hand, but the graphic below is intended to give some idea.
The resulting images can be amazingly detailed, and can be printed out at A3 size or beyond or simply enjoyed on a computer monitor. We recommend it for highly corrected telescopes without T2 bottleneck: For example, the TS Apo refractors with 2.5" or 3" focuser or ONTC Newtonians with 2.5" Wynne corrector.


ATIK 11000 S/W CCD Kamera - 45mm Diagonale - Chip
Comparison of sensors used in The Atik 11000, Atik 4000 and Atik 314L

Common features of the Atik 4000 and Atik 11000

While the other cameras in the Atik range use Sony sensors, the large-format cameras incorporate Kodak devices. These have gained a great reputation in astrophotography and offer qualities not available in the Sony CCDs. However, optimum performance from the Kodak chips is only obtained with the use of highly sophisticated control electronics and advanced cooling systems, and this is where Atik's expertise in design and build comes to the fore.

The Kodak sensors require dark frames to be used for calibration, and these must be taken at the same temperature as the primary image.
The Atik 4000 achieves this through the provision of full, set-point, temperature regulation using a two-stage Peltier element and fan. This can provide cooling to 38 degrees below ambient and will be suitable for the majority of conditions.

For more demanding use, water can be pumped though the camera's internal heat exchanger. When water cooling is employed, the maximum amount of cooling depends on the water temperature, with approximately 45 degrees of cooling being available using water from a typical cold tap.

Such efficient cooling cuts thermal noise to an absolute minimum and reduces the prevalence of hot pixels, but it raises the risk of condensation forming in or on the camera. A high-efficiency desiccant is used to dry the air inside the sensor chamber, preventing internal condensation, while condensation on the outside of the camera is avoided with the use of heater elements which gently warm the window. The power supplied to this heater is controllable through software so that it can be adapted to the environmental conditions.

The Atik large-format cameras have been designed and built to fulfil the needs of the most demanding users, whilst offering an unparalleled simplicity of use. The cameras have only two sockets - a 2.1mm socket for the 12V power supply and a USB2 port for communicating with the computer - and they are compatible with our highly acclaimed Capture software as well as AstroArt, CCDSoft and MaximDL.

ATIK 11000 S/W CCD Kamera - 45mm Diagonale
Rear terminal with USB- and 12V= connection

CCD Grades.

As standard the Akik 11000 is fitted with a KAI 11002 class II sensor, which allows for a small number of column defects. Alternatively a class I sensor with no column defects can be specified. Does the CCD grade matter? We feel the price premium placed on the class I sensor is not justified when the camera is to be used for astro-imaging. Briefly, this is because Kodak's grading scheme uses a test where the CCD is not cooled, exposures are fractions of a second and the sensor is read out several times a second. In astro-imaging, conditions for the sensors are very different since the sensor is cooled, exposures are typically many tens of seconds, and readout takes several seconds. Also it is expected that the images will be corrected with a dark frame. The result is that the grading tests do not reflect performance in astro-imaging in a useful way.

Note:
We only use the latest generation of KAI 11002 sensors, which have anti-reflection coatings on both sides of the glass cover. This reduces reflection artifacts generated between the CCD surface and the cover.

What's included in the box?
- Camera body
- 3 meter USB cable
- 1.8 meter battery power connector (Car lighter plug)
- CD-ROM with drivers, software and User's manual (PDF)
- Quickstart guide (paper)
- A high quality case with die cut foam inserts
- A universal (110-230V) power supply
- Our highly regarded software, Capture, is provided as well as plug ins for MaximDL, CCDSoft and AstroArt.
- System requirements: Pentium II class PC, with 64MB RAM, Windows XP or later (Vista 32 included), CD-ROM drive and USB 2.0 port.


up ...
We recommend following products:

General Accessories:
418,49 EUR*


Baader LRGBC CCD Filter set 2" - 5 Filters

 
503,36 EUR*


Trutek 2" filter wheel - motorized - for 4x 2" filter + 1x dark

 
418,49 EUR*


Baader 50.4 mm LRGB CCD Filter set w/o cell - Interference filter

 
 
Cleaning & Collimating:
10,00 EUR*


TS-Optics CleanPen - Optics Cleaning Pen with Pad and Brush

 
5,46 EUR*


BAADER Optical Wonder Microfiber Cleaning Cloth

 

Baader Optical Wonder Cleaning Fluid with Dose Vaporizer

 
6,64 EUR*


TS-Optics Cleaning kit (five parts) - for almost all optical surfaces

 
  
Adaptors:
32,77 EUR*


TS-Optics M68 System - Adapter from M68 to M48x0.75

 
32,77 EUR*


TS-Optics Adapter from M48 (2") filter thread to M54x0.75 thread

 
83,19 EUR*


TS-Optics M54 Filter Drawer for Ø 50mm and 50.4mm unmounted filters

 
100,00 EUR*


Geoptik Adaptor for Canon EOS Lenses to T2 for CCD cameras - with 1/4" Phototripod

 
100,00 EUR*


Geoptik Adaptor for Nikon lenses to T2 for CCD cameras - w/ 1/4" thread

 
63,03 EUR*


TS-Optics M68 System - adapter to M68x1 for the TSFEKM54 filter drawer

 
6,72 EUR*


TS-Optics 1.0mm Stainless Steel Fine Tuning Ring for M54

 
6,72 EUR*


TS-Optics 1.5mm Stainless Steel Fine Tuning Ring for M54

 
41,18 EUR*


Trutek Adapter 2" connection to M54x0.75 thread - short

 
 
Power Supply:
83,19 EUR*


12V AGM lead gel battery, 26 Ah

 
49,58 EUR*


12V 12Ah rechargeable lead gel battery

 
 
Photo Acessories:
83,19 EUR*


TS-Optics Filter Quick Changer for 2" filters - M48x0.75 mount - length 15 mm

 
467,23 EUR*


ATIK 2" motorized filter wheel - USB - for 5 x 2" Filter

 
467,23 EUR*


ATIK 2" mot. filter wheel - USB - for 5x 50mm unmounted filter

 
251,26 EUR*


TS-Optics Off Axis Guider with Zeiss M68x1 connection - short design

 
  
up

E-Mail: info@teleskop-service.de • Phone: +49 (0)89-9922875-0
Parse Time: 0,257s